CTC 601 Flash File MT6580 6.0 Dead Lcd Fix | Firmware | Download Free
CTC 601 Flash File MT6580 6.0 Dead Lcd Fix Firmware
If you are looking for a way to revive your CTC 601 device that has a dead LCD or other software issues, you have come to the right place. In this article, we will show you how to download and install the CTC 601 Flash File on your device, and how to fix the dead LCD problem after flashing. Read on to find out more.
CTC 601 Flash File MT6580 6.0 Dead Lcd Fix | Firmware |
Introduction
The CTC 601 is a smartphone that runs on the MediaTek MT6580 chipset and Android 6.0 Marshmallow operating system. It has a 5.5-inch IPS LCD display, a quad-core processor, 1 GB of RAM, 8 GB of internal storage, a microSD card slot, a rear camera, a front camera, and a removable battery.
However, like any other smartphone, the CTC 601 can encounter some software issues that can cause it to malfunction or become unusable. For example, you may experience bootloop, hang on logo, virus infection, IMEI null, network error, or dead LCD after flashing or rooting your device.
Fortunately, there is a solution for these problems: the CTC 601 Flash File. This is a firmware file that contains the stock ROM and the flash tool for your device. By flashing this file on your device, you can restore it to its original factory state and fix any software issues that you may have.
What is CTC 601 Flash File?
The CTC 601 Flash File is a firmware file that contains the stock ROM and the flash tool for your device. The stock ROM is the official software that comes pre-installed on your device when you buy it from the manufacturer. It contains the operating system, the user interface, the apps, and the settings for your device.
The flash tool is a software that allows you to flash or install the stock ROM on your device using a computer and a USB cable. The flash tool that is compatible with the CTC 601 device is called SP Flash Tool. This is a free and easy-to-use tool that supports all MediaTek devices.
Why do you need CTC 601 Flash File?
You may need the CTC 601 Flash File for various reasons, such as:
To fix software issues on your device, such as bootloop, hang on logo, virus infection, IMEI null, network error, or dead LCD.
To unroot your device if you have rooted it before and want to go back to the stock ROM.
To upgrade or downgrade your device's firmware to a different version.
To remove any custom ROM or recovery that you have installed on your device.
To reset your device's FRP (Factory Reset Protection) lock if you have forgotten your Google account credentials.
To restore your device's warranty if you have voided it by rooting or flashing custom ROMs.
How to download CTC 601 Flash File?
To download the CTC 601 Flash File, you need to follow these steps:
Go to this link:
Select "CTC" from the drop-down menu under "Brand".
Select "CTC-601" from the drop-down menu under "Model".
Select "MT6580" from the drop-down menu under "Chipset".
Select "6.0" from the drop-down menu under "Android Version".
Click on the "Download" button and wait for the file to be downloaded on your computer.
Extract the zip file using a software like WinRAR or 7-Zip. You will get a folder containing the stock ROM and the flash tool files.
How to install CTC 601 Flash File on your device?
To install the CTC 601 Flash File on your device, you need to follow these steps:
Requirements
A computer running Windows XP, 7, 8, or 10.
A USB cable that can connect your device to your computer.
A backup of your personal data, such as contacts, messages, photos, videos, etc. Flashing will erase all your data, so make sure you have a backup before proceeding.
A battery charge of at least 50% on your device. Flashing can take some time and consume battery power, so make sure you have enough charge before proceeding.
A driver for your device installed on your computer. You can download the driver from this link:
Steps
Open the folder where you extracted the CTC 601 Flash File. You will see a file named "flash_tool.exe". Double-click on it to launch the SP Flash Tool.
Click on the "Download" tab at the top of the SP Flash Tool window.
Click on the "Scatter-loading" button and browse to the folder where you extracted the CTC 601 Flash File. You will see a file named "MT6580_Android_scatter.txt". Select it and click "Open".
The SP Flash Tool will load the scatter file and display all the partitions of your device's firmware. Make sure all the boxes are checked and the locations are correct.
Click on the "Download" button at the top of the SP Flash Tool window. The flashing process will begin.
Turn off your device and remove the battery if it is removable. Then, connect your device to your computer using the USB cable. The SP Flash Tool will detect your device and start flashing it.
Wait for the flashing process to complete. It may take several minutes depending on the size of your firmware. Do not disconnect or interrupt the process until it is done.
When the flashing process is done, you will see a green circle with a check mark and a message saying "Download OK". This means that the flashing was successful.
Disconnect your device from your computer and insert the battery if it is removable. Then, turn on your device and wait for it to boot up. It may take longer than usual for the first time, so be patient.
Congratulations! You have successfully installed the CTC 601 Flash File on your device. You can now enjoy using your device with its original stock ROM.
How to fix dead LCD after flashing CTC 601 Flash File?
Sometimes, after flashing your device with a new firmware, you may encounter a problem where your device's LCD screen does not turn on or display anything. This is called a dead LCD problem. It can be caused by various reasons, such as:
Causes of dead LCD
You flashed a wrong or incompatible firmware on your device. For example, you flashed a firmware meant for a different model or chipset of your device.
You flashed an incomplete or corrupted firmware on your device. For example, you downloaded a firmware from an unreliable source or interrupted the flashing process before it was finished.
You flashed a firmware that has a different LCD driver than your device's original firmware. For example, you flashed a firmware that has a different resolution or color depth than your device's LCD screen.
Solutions for dead LCD
If you are facing a dead LCD problem after flashing CTC 601 Flash File on your device, you can try these solutions:
Flash your device with its original stock ROM or a compatible firmware that matches your device's model and chipset. You can download the original stock ROM from this link:
Flash your device with a firmware that has the same LCD driver as your device's original firmware. You can check the LCD driver of your device by using an app like MTK Engineering Mode or MTK Droid Tools. You can download these apps from these links: Here are some possible download links for the driver, MTK Engineering Mode, and MTK Droid Tools:
Driver:
MTK Engineering Mode: or
MTK Droid Tools: or
Once you have downloaded and installed the required tools, you can proceed with the next steps. Here are the steps to fix the dead LCD problem by using the MTK Engineering Mode or MTK Droid Tools:
Launch the MTK Engineering Mode or MTK Droid Tools app on your device.
Go to the "Hardware Testing" tab and select "LCD".
You will see a list of LCD drivers that are compatible with your device. Select the one that matches your device's original firmware. For example, if your device's original firmware has a resolution of 720x1280 and a color depth of 16 bits, select the driver that has the same parameters.
Click on the "Write" button and wait for the app to write the LCD driver on your device.
Reboot your device and check if the LCD screen is working properly. If not, try another LCD driver from the list until you find the one that works.
Conclusion
In this article, we have shown you how to download and install the CTC 601 Flash File on your device, and how to fix the dead LCD problem after flashing. We hope that this article has been helpful and informative for you. By following the steps and solutions that we have provided, you can revive your CTC 601 device and enjoy using it with its original stock ROM.
Summary of the article
Here is a summary of what we have covered in this article:
The CTC 601 Flash File is a firmware file that contains the stock ROM and the flash tool for your device.
You may need the CTC 601 Flash File to fix software issues on your device, such as bootloop, hang on logo, virus infection, IMEI null, network error, or dead LCD.
You can download the CTC 601 Flash File from this link: and extract it on your computer.
You can install the CTC 601 Flash File on your device using the SP Flash Tool and a USB cable.
You can fix the dead LCD problem after flashing by using the MTK Engineering Mode or MTK Droid Tools and selecting the correct LCD driver for your device.
Benefits of using CTC 601 Flash File
Here are some of the benefits of using CTC 601 Flash File on your device:
You can restore your device to its original factory state and fix any software issues that you may have.
You can unroot your device if you have rooted it before and want to go back to the stock ROM.
You can upgrade or downgrade your device's firmware to a different version.
You can remove any custom ROM or recovery that you have installed on your device.
You can reset your device's FRP lock if you have forgotten your Google account credentials.
You can restore your device's warranty if you have voided it by rooting or flashing custom ROMs.
FAQs
Here are some of the frequently asked questions about CTC 601 Flash File:
Q: Is CTC 601 Flash File free to download?
A: Yes, CTC 601 Flash File is free to download from this link: . You do not need to pay anything or register to download it.
Q: Is CTC 601 Flash File safe to use?
A: Yes, CTC 601 Flash File is safe to use as long as you download it from a reliable source and follow the instructions carefully. However, flashing is a risky process that can damage your device if done incorrectly, so make sure you backup your data and charge your battery before proceeding.
Q: How long does it take to flash CTC 601 Flash File on my device?
A: The flashing time depends on the size of your firmware and the speed of your computer and USB cable. It may take several minutes or up to an hour to flash CTC 601 Flash File on your device. Do not disconnect or interrupt the process until it is done.
Q: What should I do if I encounter an error while flashing CTC 601 Flash File?
A: If you encounter an error while flashing CTC 601 Flash File, such as BROM error, DA error, DRAM error, or SP Flash Tool error, you can try these solutions:
Check if you have installed the correct driver for your device on your computer. You can download the driver from this link:
Check if you have selected the correct scatter file and firmware for your device. You can download the CTC 601 Flash File from this link:
Check if you have connected your device to your computer properly and securely. You may need to remove and reinsert the battery or press the volume up or down button while connecting.
Check if you have disabled any antivirus or firewall software on your computer that may interfere with the flashing process.
Check if you have enough space on your computer and your device to store the firmware files.
Try using a different computer or USB cable if possible.
Q: How can I contact the support team if I need more help with CTC 601 Flash File?
A: If you need more help with CTC 601 Flash File, you can contact the support team by sending an email to this address: . You can also visit this website: for more information and tutorials on how to flash CTC 601 Flash File. dcd2dc6462