top of page

Remote learning support

Public·57 members

Gcc Bobcat Bi-60 Driver |TOP|



Gcc Bobcat Bi-60 Driver: How to Install and Use It for Vinyl Cutting




If you have a Gcc Bobcat Bi-60 vinyl cutter, you might be wondering how to install and use the driver for it on your computer. The driver is a software that allows your computer to communicate with your cutter and send commands to it. Without the driver, your cutter will not work properly.




Gcc Bobcat Bi-60 Driver


DOWNLOAD: https://www.google.com/url?q=https%3A%2F%2Fbytlly.com%2F2tJk9I&sa=D&sntz=1&usg=AOvVaw0_yigjdUIWrDnvgDmKjZDD



In this article, we will show you how to download, install and use the Gcc Bobcat Bi-60 driver for Windows 7 64-bit, which is one of the most common operating systems for vinyl cutting. We will also give you some tips and troubleshooting advice for using the driver.


How to Download the Gcc Bobcat Bi-60 Driver




The first step is to download the driver from the official website of Gcc, which is a leading manufacturer of vinyl cutters and other sign making equipment. To download the driver, follow these steps:


  • Go to https://www.cocut.com/driver/index.dml, which is a page that lists all the drivers for CoCut, a software that works with Gcc cutters.



  • Scroll down to find the driver for Gcc Bobcat Bi-60, which is under the GCC category. The file name is Bobcat BI-60.ecd.



  • Click on the icon next to the file name to download it. Save it to a location where you can easily find it later.



How to Install the Gcc Bobcat Bi-60 Driver




After downloading the driver, you need to install it on your computer. To install the driver, follow these steps:


  • Connect your Gcc Bobcat Bi-60 cutter to your computer using a USB cable.



  • Turn on your cutter and press the MODE button until you see USB Common on the display. This will put your cutter in USB Common mode, which is necessary for installing the driver.



  • Go to the location where you saved the driver file and double-click on it. This will launch a setup wizard that will guide you through the installation process.



  • Follow the instructions on the screen and accept the terms and conditions. The wizard will automatically detect your cutter and install the driver for it.



  • When the installation is complete, click Finish to exit the wizard.



How to Use the Gcc Bobcat Bi-60 Driver




Now that you have installed the driver, you can use it with any cutting software that supports Gcc cutters, such as CoCut, FlexiSign, or SignCut. To use the driver, follow these steps:


  • Launch your cutting software and open or create a design that you want to cut.



  • Select your cutter model from the list of devices in your software. For example, in CoCut Pro XT, go to Cutter > Setup > GCC > Sign Pal Bobcat BI-60.



  • Adjust the settings for your cutter, such as speed, force, offset, etc., according to your preferences and material type.



  • Send your design to your cutter by clicking on Cut or Plot in your software.



  • Your cutter will start cutting your design according to your settings.



Tips and Troubleshooting for Using the Gcc Bobcat Bi-60 Driver




To ensure that you get the best results from using the Gcc Bobcat Bi-60 driver, here are some tips and troubleshooting advice:


  • Make sure that your cutter firmware is up to date. You can check and update your firmware by using GCC Firmware Updater Tool, which you can download from https://www.gccworld.com/en/download.php?act=download&no=3.



If you have any problems with installing or using the driver, you can contact GCC technical support by phone or email. You can find their contact information at c481cea774


About

Welcome to the group! You can connect with other members, ge...

Members

  • Kayla Atherton
  • Van Proft
    Van Proft
  • Gerth Sniper
    Gerth Sniper
  • Alex Gan
    Alex Gan
  • Justin K Bozeman
    Justin K Bozeman
bottom of page